manualshive.com logo in svg

Mitsubishi Electric MELSERVO-J4 series, Instruction Manual

The Mitsubishi Electric MELSERVO-J4 series offers advanced servo amplifiers and motors for precise motion control. Unlock the full potential of this product by downloading the Instruction Manual from our website for free. Find detailed guidance, troubleshooting tips, and more to effortlessly optimize your machine's performance. manualshive.com

Share
Download
background image

5  PARAMETERS

5.2  Detailed list of parameters

201

5

PB52
VRF21
Vibration 
suppression control 
2 - Vibration 
frequency

Set the vibration frequency for vibration suppression control 2 to suppress low-frequency machine vibration.
When "Vibration suppression control 2 tuning mode selection" is set to "Automatic setting (_ _ 1 _)" in [Pr. 
PB02], this parameter will be set automatically. "Manual setting (_ _ 2 _)" is selected, the setting written to the 
parameter is used.
To enable the setting value, set "Vibration suppression mode selection" to "3 inertia mode (_ _ _ 1)" in [Pr. 
PA24]. The setting range of this parameter varies, depending on the value in [Pr. PB07]. If a value out of the 
range is set, the vibration suppression control is disabled.

Page 254 Advanced vibration suppression control II

Setting range: 0.1 to 300.0

100.0 [Hz]

PB53
VRF22
Vibration 
suppression control 
2 - Resonance 
frequency

Set the resonance frequency for vibration suppression control 2 to suppress low-frequency machine 
vibration.
When "Vibration suppression control 2 tuning mode selection" is set to "Automatic setting (_ _ 1 _)" in [Pr. 
PB02], this parameter will be set automatically. "Manual setting (_ _ 2 _)" is selected, the setting written to the 
parameter is used.
To enable the setting value, set "Vibration suppression mode selection" to "3 inertia mode (_ _ _ 1)" in [Pr. 
PA24]. The setting range of this parameter varies, depending on the value in [Pr. PB07]. If a value out of the 
range is set, the vibration suppression control is disabled.

Page 254 Advanced vibration suppression control II

Setting range: 0.1 to 300.0

100.0 [Hz]

PB54
VRF23
Vibration 
suppression control 
2 - Vibration 
frequency damping

Set a damping of the vibration frequency for vibration suppression control 2 to suppress low-frequency 
machine vibration.
When "Vibration suppression control 2 tuning mode selection" is set to "Automatic setting (_ _ 1 _)" in [Pr. 
PB02], this parameter will be set automatically. "Manual setting (_ _ 2 _)" is selected, the setting written to the 
parameter is used.
To enable the setting value, set "Vibration suppression mode selection" to "3 inertia mode (_ _ _ 1)" in [Pr. 
PA24]. 

Page 254 Advanced vibration suppression control II

Setting range: 0.00 to 0.30

0.00

PB55
VRF24
Vibration 
suppression control 
2 - Resonance 
frequency damping

Set a damping of the resonance frequency for vibration suppression control 2 to suppress low-frequency 
machine vibration.
When "Vibration suppression control 2 tuning mode selection" is set to "Automatic setting (_ _ 1 _)" in [Pr. 
PB02], this parameter will be set automatically. "Manual setting (_ _ 2 _)" is selected, the setting written to the 
parameter is used.
To enable the setting value, set "Vibration suppression mode selection" to "3 inertia mode (_ _ _ 1)" in [Pr. 
PA24]. 

Page 254 Advanced vibration suppression control II

Setting range: 0.00 to 0.30

0.00

PB56
VRF21B
Vibration 
suppression control 
2 - Vibration 
frequency after gain 
switching

Set the vibration frequency for vibration suppression control 2 for when the gain switching is enabled.
When a value less than 0.1 Hz is set, the value will be the same as that of [Pr. PB52].
This parameter will be enabled only when the following conditions are fulfilled.

• "Gain adjustment mode selection" is set to "Manual mode (_ _ _ 3)" in [Pr. PA08].
• "Vibration suppression mode selection" is set to "3 inertia mode (_ _ _ 1)" in [Pr. PA24].
• "Vibration suppression control 2 tuning mode selection" is set to "Manual setting (_ _ 2 _)" in [Pr. PB02].
• "Gain switching selection" is set to "Switching is enabled by control command from controller and Input 

device CDP (Gain switching) (_ _ _ 1)" in [Pr. PB26].

Switching during driving may cause a shock. Be sure to switch them after the servo motor stops.
Setting range: 0.0 to 300.0

0.0 [Hz]

PB57
VRF22B
Vibration 
suppression control 
2 - Resonance 
frequency after gain 
switching

Set the resonance frequency for vibration suppression control 2 for when the gain switching is enabled.
When a value less than 0.1 Hz is set, the value will be the same as that of [Pr. PB53].
This parameter will be enabled only when the following conditions are fulfilled.

• "Gain adjustment mode selection" is set to "Manual mode (_ _ _ 3)" in [Pr. PA08].
• "Vibration suppression mode selection" is set to "3 inertia mode (_ _ _ 1)" in [Pr. PA24].
• "Vibration suppression control 2 tuning mode selection" is set to "Manual setting (_ _ 2 _)" in [Pr. PB02].
• "Gain switching selection" is set to "Switching is enabled by control command from controller and Input 

device CDP (Gain switching) (_ _ _ 1)" in [Pr. PB26].

Switching during driving may cause a shock. Be sure to switch them after the servo motor stops.
Setting range: 0.0 to 300.0

0.0 [Hz]

PB58
VRF23B
Vibration 
suppression control 
2 - Vibration 
frequency damping 
after gain switching

Set a damping of the vibration frequency for vibration suppression control 2 when the gain switching is 
enabled.
This parameter will be enabled only when the following conditions are fulfilled.

• "Gain adjustment mode selection" is set to "Manual mode (_ _ _ 3)" in [Pr. PA08].
• "Vibration suppression mode selection" is set to "3 inertia mode (_ _ _ 1)" in [Pr. PA24].
• "Vibration suppression control 2 tuning mode selection" is set to "Manual setting (_ _ 2 _)" in [Pr. PB02].
• "Gain switching selection" is set to "Switching is enabled by control command from controller and Input 

device CDP (Gain switching) (_ _ _ 1)" in [Pr. PB26].

Switching during driving may cause a shock. Be sure to switch them after the servo motor stops.
Setting range: 0.00 to 0.30

0.00

No./symbol/
name

Setting 
digit

Function

Initial 
value
[unit]

Summary of Contents for MELSERVO-J4 series







































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MELSERVO-J4 series

Aaron ZA-100 Schematic Diagram preview
ZA-100
Brand: Aaron Pages: 2
Yuasa Yu-Fit Installation Manual preview
Yu-Fit
Brand: Yuasa Pages: 12
Luxman P-750u Owner'S Manual preview
P-750u
Brand: Luxman Pages: 20
Sponsler MN-717-A Installation & Operation Manual preview
MN-717-A
Brand: Sponsler Pages: 4
Biamp MCA SERIES Operation Manual preview
MCA SERIES
Brand: Biamp Pages: 13
moon Mc-8 Owner'S Manual preview
Mc-8
Brand: moon Pages: 12
l-com HAKIT-RTG Series User Manual preview
HAKIT-RTG Series
Brand: l-com Pages: 27
Bose Lifestyle 8 Series II Owner'S Manual preview
Lifestyle 8 Series II
Brand: Bose Pages: 41
Laney Hardcore MXD15 User Manual preview
Hardcore MXD15
Brand: Laney Pages: 8
OM POWER OM1006 Instruction Manual preview
OM1006
Brand: OM POWER Pages: 26
AMC iMIX1 User Manual preview
iMIX1
Brand: AMC Pages: 6
AXTON A1390 Installation & Operating Instructions Manual preview
A1390
Brand: AXTON Pages: 58
Pro'sKit 3PK-NT023N User Manual preview
3PK-NT023N
Brand: Pro'sKit Pages: 20
Lyrita Phono MC Manual preview
Phono MC
Brand: Lyrita Pages: 4
PJB PB-100 Owner'S Manual preview
PB-100
Brand: PJB Pages: 7
Audio System R 1250.1 D Owner'S Manual preview
R 1250.1 D
Brand: Audio System Pages: 7
Classe Audio OMEGA - V1.1 Owner'S Manual preview
OMEGA - V1.1
Brand: Classe Audio Pages: 30
ORA IDR 3000 User Manual preview
IDR 3000
Brand: ORA Pages: 7

Brands by name

Popular brands

Load more brands