Micronas SDA 6000, User Manual

Page: 27 / 412

SDA 6000
PRELIMINARY DATA SHEET
Version 2.1
Pin Descriptions
2 - 8 Micronas
83 P3.9 MTSR I/O General purpose I/O port/SSC master-
transmit/slave-receiver O/I
88 P3.10 TxD0 I/O General purpose I/O port/ASC0 clock/data
output
89 P3.11 RxD0 I/O General purpose I/O port/ASC0 data input
(asynchronous) or I/O (synchronous.)
90 P3.12 – I/O General purpose I/O port
91 P3.13 SCLK I/O General purpose I/O port/SSC master clock
output/slave clock input
92 P3.15 – I/O General purpose I/O port
124 P5.0 AN.0 I General purpose I/O port/Analog input for
A/D-converter
125 P5.1 AN.1 I General purpose I/O port/Analog input for
A/D-converter
126 P5.2 AN.2 I General purpose I/O port/Analog input for
A/D-converter
127 P5.3 AN.3 I General purpose I/O port/Analog input for
A/D-converter
93 P5.14 T4EUD I/O General purpose I/O port/GPT1 timer T4
ext.up/down ctrl. input
94 P5.15 T2EUD I/O General purpose I/O port/GPT1 timer T2
ext.up/down ctrl. input
95 P6.0 TRIG_IN I/O General purpose I/O port/Trigger input-signal
for ‘On Chip Debug System’ (OCDS)
96 P6.1 TRIG_OUT I/O General purpose I/O port/Trigger output-
signal for ‘On Chip Debug System’ (OCDS)
97 P6.2 – I/O General purpose I/O port
98 P6.3 SCL1 I/O General purpose I/O port/I
2
C bus clock line 1
99 P6.4 SDA1 I/O General purpose I/O port/I
2
C bus data line 1
100 P6.5 – I/O General purpose I/O port
101 P6.6 SDA2 I/O General purpose I/O port/I
2
C bus data line 2
1 TCK – I Clock for JTAG interface
3 TDI – I Data input for JTAG interface
Table 2-1 Pin Definition and Functions (cont’d)
Pin
No. Pin Name Second
Function Dir. Function