manualshive.com logo in svg

Micronas SDA 6000, User Manual

Share
Download
Micronas SDA 6000 User Manual Download Page 15

SDA 6000

PRELIMINARY DATA SHEET

Version 2.1

Overview

1 - 4

Micronas

 

supports SDRAMs as well as ROMs or FLASH ROMs. The organization of the memory
is linear, so that it is easy to program the chip for graphic purposes.

The SW development environment “MATE” is available to simplify and speed up the
development of the software and displayed information. 

MATE

 stands for: 

M

2 

A

dvanced

T

ool 

E

nvironment. Using MATE, two primary goals are achieved: shorter Time-to-Market

and improved SW qualitiy. In detail:

• Re-usability
• Target independent development
• Verification and validation before targeting
• General test concept
• Documentation
• Graphical interface design for non-programmers
• Modular and open tool chain, configurable by customer

MATE uses available C166 microcontroller family standard tools as well as a
dedicated M2 tools.

Summary of Contents for SDA 6000





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands