Micronas SDA 6000, User Manual

Page: 146 / 412

SDA 6000
PRELIMINARY DATA SHEET
Version 2.1
System Control & Configuration
6 - 26 Micronas
6.9 Identification Registers
A set of 8 identification registers are provided to offer information on the chip as
manufacturer, chip type and its memory (EEPROM, OTP, DRAM or Flash memory)
properties, and information on the CSCU (type of module, redesign state).
The ID registers are read only registers. These registers are:
• IDMANUF, for manufacturer and department identification,
• IDCHIP, for device identification and revision code,
• IDMEM, for identification of on-chip program memory (type, size),
• IDMEM2, for identification of additional EEPROM, OTP, DRAM or Flash memory,
• IDPROG, for identification of programming/erasing voltage of on-chip program
memory,
• IDRT, redesign tracking register for identification of revisions and laser cuts.
Besides, some other registers provide identification of some parts of the M2. These
registers are hardwired inside the M2.
• CPUID, for CPU identification,
• IDSCU, for CSCU identification,
• DIPX version bit field, for OCDS identification.
6.9.1 System Identification
These identific ID register description
IDMANUF Reset Value: XXXX
H
5 4 3 2 1 0 11 10 9 8 7 6 15 14 13 12
r r
MANUF DEPT