Matrox Iris GT MIL, Installation And Technical Reference, Page: 35 / 256

Configuring your Matrox Iris GT to work with a network that uses DHCP 35
4. Enter the MAC address of your Matrox Iris GT in the MAC Address text box.
Note that the MAC address is written on a sticker attached to your Matrox Iris GT.
5. Click on the Load button. The network settings currently in use are displayed
on-screen.
If Matrox IrisBootParams has difficulty locating your Matrox Iris GT, a timeout
error is displayed. Verify that the MAC address is entered correctly. If the problem
persists, verify that your firewall settings or network router settings are not
blocking communications.
6. Select the DHCP option.
7. Click on the Save button.
8. Close the Matrox IrisBootParams utility.
9. Disconnect the power supply from your Matrox Iris GT.
10. Disconnect your computer from your Matrox Iris GT, and connect your
computer to your network.
11. Connect your Matrox Iris GT to your network.
12. Reconnect the power supply to your Matrox Iris GT and wait.
The Power LED and the User LED of your Matrox Iris GT should turn green.
This indicates that your Matrox Iris GT is now using an automatically assigned
IP address and is ready to communicate with your network.