Matrox Iris GT MIL, Installation And Technical Reference, Page: 163 / 256

Utilities installed on your development computer 163
Once the Matrox IrisBootParams utility has the IP address of your Matrox Iris GT,
you can:
• Change the IP address, subnet, and/or network name of your Matrox Iris GT
by entering the new information in the Static section.
• Set your Matrox Iris GT to use DHCP by selecting the DHCP option.
• Set your Matrox Iris GT to use automatic naming by selecting the Auto name
option.
• Change the COM port settings by entering the new information in the COM
port parameters section.
4. Click on the Save button. This will change the settings of your Matrox Iris GT.
5. Reboot your Matrox Iris GT by unplugging it and then plugging it back in.
IrisClientUpdate utility
The Matrox IrisClientUpdate utility lists the powered-up Matrox Iris smart
cameras available on your network (including Matrox Iris GT, E-Series, and
P-Series smart cameras). It also allows you to retrieve their firmware information,
update their operating system, MIL, QFEs, and install or update the
RemoteClientActiveX ActiveX plugin.