Matrox Iris GT MIL, Installation And Technical Reference, Page: 157 / 256

Power LED error codes 157
For example, the Power and User LEDs have the following blink sequence when
the operating system image on the smart camera is invalid.
• The Power LED is red and constant.
• The User LED flashes 16 times (6-1-4-3-3). The flashes are divided into groups
(pulses) with a 300 msec pause between each pulse. A 1 second pause occurs before
the blink pattern repeats.
When the User LED stops blinking. The error code is complete.
❖
Note that your Matrox Iris GTmight stop the bootloader execution when an error
occurs. Any critical error will prevent your Matrox Iris GT from continuing the
boot process.
6-1-3-2-1 Sensor FPGA error.
6-1-3-2-2 Sensor FPGA RAM error.
6-1-3-2-3 AuxIO FPGA error.
6-1-3-3-1 SMBus error.
6-1-3-3-2 Clock synthesizer error.
6-1-3-3-3 Motherboard SEEPROM communication error.
6-1-3-3-4 Motherboard SEEPROM data error.
6-1-3-4-1 CPU temperature monitor communication error.
6-1-3-4-2 CPU temperature too high.
6-1-4-1-1 Ethernet SEEPROM error.
6-1-4-1-3 Sensor board SEEPROM communication error.
6-1-4-1-4 Sensor board SEEPROM data error.
6-1-4-2-1 Sensor board temperature sensor communication error.
6-1-4-2-2 Sensor board temperature too high.
6-1-4-2-3 Boot parameters block error.
6-1-4-2-4 Boot parameters block data error.
6-1-4-3-1 Matrox Iris GT sent a maximum number of request to boot from the Ethernet
without receiving an answer from a computer running the IrisOsDownloader
utility.
6-1-4-3-2 Operating system downloaded through Ethernet is not valid.
6-1-4-3-3 Operating system image on the solid state drive is not valid.
User LED blink sequence Error