Matrox Iris GT MIL, Installation And Technical Reference, Page: 141 / 256

Open-wire connectors reference 141
Open-wire connectors reference
The breakout board has four separate cable connectors (see A, B, C and D in the
diagram at the beginning of this appendix) designed for open-wire connections.
Each connector is composed of multiple wire terminals. Each of these wire
terminals requires a stripped cable to be inserted, wire by wire, into the available
holes. Each wire terminal is numbered J1 though J39 on the board.
Smart camera connector
The smart camera connector is a series of 17 wire terminals. It connects to the
digitial I/O and power connector of your Matrox Iris GT, using the open-wire
digital I/O and power cable that comes with the Matrox Iris GT starter kit. Each
wire terminal receives a wire with a color corresponding to the color listed on the
breakout board. This connector provides power to your Matrox Iris GT, receives
Matrox Iris GT auxiliary output signals and controlled-current output (CCS), and
transmits auxiliary input and trigger signals to your Matrox Iris GT. This
connector can also receive and transmit RS-232 messages.
Breakout board connector name Wire
terminal Connector type
Smart camera connector J1-J17 Connects the digital I/O and power cable of your Matrox Iris GT to the breakout board.
Breakout board power source connector J19-J20 Provides power to the breakout board.
Output connector J21-J30 Connects to a third-party devices so that they can receive auxiliary output signals and
controlled-current output (CCS) from your Matrox Iris GT.
Input connector J32-J39 Connects to a third-party device so that they can send auxiliary input and trigger
signals to your Matrox Iris GT.
WH
I
TE
-
YE
LL
BROWN
-
GREEN
YE
LL
OW
P
I
NK
WH
I
TE
-
GREEN
B
L
ACK
GREEN
RED
-
B
L
UE
WH
I
TE
GRA
Y
-
P
I
NK
B
L
UE
WH
I
TE
-
GRA
Y
V
I
O
L
ET
YE
LL
_BROW
GRA
Y
RED
BROWN
J2 J3 J4 J5 J6 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J1