Matrox Iris GT MIL, Installation And Technical Reference, Page: 149 / 256

LEDs 149
LEDs
The LEDs show the activity on the signal associated with the push button. Note
that the activity on the signal can be caused either by using the push button or by
the third-party device connected to the breakout board’s input connector.
The board reference for the LEDs is as follows:.
DS1 DS2 DS3
DS4
DS5
TR I G + I NPUT 0 I NPUT 1 I NPUT 2 I NPUT 3
LED Description Associated Matrox Iris GT
signal Routed through the breakout
board’s smart camera connector
TRIG+ (DS1) Opto-isolated trigger signal LED. TRIG_ J1
INPUT 0 (DS2) Opto-isolated auxiliary signal 0 (input) LED. AUX(USER)_OPTO_IN0 J3
INPUT 1 (DS3) Opto-isolated auxiliary signal 1 (input) LED. AUX(USER)_OPTO_IN1 J4
INPUT 2 (DS4) Opto-isolated auxiliary signal 2 (input) LED. AUX(USER)_OPTO_IN2 J5
INPUT 3 (DS5) Opto-isolated auxiliary signal 3 (input) LED. AUX(USER)_OPTO_IN3 J6