Matrox Iris GT MIL, Installation And Technical Reference, Page: 101 / 256

Matrox Iris GT connectors 101
This cable can be purchased separately from Matrox (GT-CBL-ETH/5*). For an
alternate source of 100/1000 BaseT cables, contact:
VGA/USB connector
The VGA/USB connector is an M12 12-pin male connector that transmits and
receives both RGB analog video output and USB signals.
The pinout for the VGA/USB connector is as follows:
Cable information
Manufacture Phoenix Contact GmbH & Co. KG
Part number: VS-M12MS-8CON-RJ45-940/5,0 Order No.: 1658781
Description: Assembled Ethernet cable, CAT 5e, shielded, 4-pair, AWG 26 stranded
(7-wire), RAL 5021 (water blue), M12 8-pos. A-coded on RJ45 plug,
length: 5 m
Pin number Signal name Description
1 USB PWR 5 V supplied from your Matrox Iris GT to the USB
peripherals.
2 USB_DATA_P USB data +.
3 USB_DATA_N USB data -.
4 GND Ground.
5 RED_VID_OUT R component of the RGB video output signal.
6 BLUE_VID_OUT B component of the RGB video output signal.
7 VSYNC Vertical sync of the RGB video output signal.
8 HSYNC Horizontal sync of the RGB video output signal.
9 GREEN_VID_OUT G component of the RGB video output signal.
10 GND Ground.
11 GND Ground.
12 GND Ground.
4
11 3
2
10
1
9
12
8
7
6
5