Matrox Iris GT MIL, Installation And Technical Reference, Page: 142 / 256

142 Appendix F: The breakout board
The pinout for the breakout board’s smart camera connector is as follows.
Breakout board’s smart camera
connector Digital I/O and power connector on
Matrox Iris GT Description
Wire terminal Wire color Pin
number Signal name
J1 Black 7 TRIG_O Opto-isolated trigger input signal, positive.
When using the push-button trigger generator, turn on switch 2
of the output-to-trigger bypass switch box (SW6[2]).
J2 White-yellow 15 TRIG_OPTO_IN0- Opto-isolated trigger input signal, negative.
J3 Brown-green 14 AUX(USER)_O Opto-isolated auxiliary signal 0 (input), positive.
Supported function: User-defined signal 0 (input).
Note: The negative component of this signal is internally
connected to the ground.
J4 Yellow 6 AUX(USER)_O Opto-isolated auxiliary signal 1 (input), positive.
Supported function: User-defined signal 1 (input).
Note: The negative component of this signal is internally
connected to the ground.
J5 Pink 5 AUX(USER)_O Opto-isolated auxiliary signal 2 (input), positive.
Supported function: User-defined signal 2 (input).
Note: The negative component of this signal is internally
connected to the ground.
J6 White-green 13 AUX(USER)_O Opto-isolated auxiliary signal 3 (input), positive.
Supported function: User-defined signal 3 (input).
Note: The negative component of this signal is internally
connected to the ground.
J7 Green 4 Reserved Reserved.
J8 Red-blue 12 AUX(STB)_OPENC_OUT4 Open collector auxiliary signal 4 (output).
Supported function: User-defined signal 4 (output), exposure
signal (generated using exposure timer 1), trigger signal bypass,
or a programmable strobe signal (strobe-pulse, pulse-width
modulated, generated using exposure timer 2).
J9 White 3 AUX(STB)_OPENC_OUT5 Open collector auxiliary signal 5 (output).
Supported function: User-defined signal 5 (output), exposure
signal, trigger signal bypass, or strobe signal (unmodulated,
generated using exposure timer 2).
J10 Gray-pink 11 AUX(USER)_OPENC_OUT6 Open collector auxiliary signal 6 (output).
Supported function: User-defined signal 6 (output) or exposure
signal.
J11 Blue 2 AUX(USER)_OPENC_OUT7 Open collector auxiliary signal 7 (output).
Supported function: User-defined signal 7 (output).