Matrox Iris GT MIL, Installation And Technical Reference, Page: 187 / 256

Utilities installed on your Matrox Iris GT 187
Parameters
• /P:Source . Specifies the folder from which to read the files to pack.
• /R. Specifies whether to read the source folder recursively (that is, whether all
subfolders within the source should be packed as well).
• /D:Destination . Specifies the folder in which to write the packed files. When not
specified, the packed files are written to the folder from which this utility is called.
Errors
None.
MemMon utility
The MemMon utility monitors the changes to the global memory state of your
Matrox Iris GT. It inquires the amount of memory at a specified interval of time,
repeating until you interrupt it, by typing
q . This utility can report this
information to the screen or to a file.
Syntax
Parameters
• Command . Specifies what should be queried.
- DMA . Queries the amount of free non-paged linear (DMA) memory.
- RAM . Queries the amount of free RAM.
- LPOOL Queries the amount of memory reserved for loading EXE and DLL
files (the loader pool).
❖
You can press d to monitor DMA memory while the utility is running, r to
monitor RAM, or l to monitor the loader pool.
• msec . Specifies the number of msecs between inquires of the global memory state.
• Filename . Specifies the file in which to log the results. Use NULL to have results
reported only to the screen.
\>MemMon [Command] [msec] [Filename]