Matrox Iris GT MIL, Installation And Technical Reference, Page: 143 / 256

Open-wire connectors reference 143
J12 White-gray 17 CCS Controlled-current output, designed to be connected to a LED
lighting device (0-500 mA, generated using exposure timer 2).
Note that if your connected LED lighting device requires 24 V, the
Matrox Iris GT requires a 24 V power source.
J13 Brown 1 RxD_RS232 RS-232 receive.
J14 Violet 10 TxD_RS232 RS-232 transmit.
J15 Yellow-brown 16 GND Ground.
J16 Gray 8 PWR Power provided to your Matrox Iris GT. The power must be
+12 V or +24 V +/- 10%. The amount of power required is
determined by the power requirements of the devices attached to
your Matrox Iris GT (such as a Ring LED).
To properly power Matrox Iris GT, J15, J16 and J17 must be
connected to your smart camera.
J17 Red 9 PWR Power provided to your Matrox Iris GT. The power must
be+12 V or +24 V +/- 10%. The amount of power required is
determined by the power requirements of the devices attached to
your Matrox Iris GT (such as a Ring LED).
To properly power Matrox Iris GT, J15, J16 and J17 must be
connected to your smart camera.
Breakout board’s smart camera
connector Digital I/O and power connector on
Matrox Iris GT Description
Wire terminal Wire color Pin
number Signal name