and left click the mouse to place a Word Lamp object on the screen. Move the mouse cursor over the
Word Lamp object and double-click the Word Lamp object. The Edit Word Lamp Object dialog box
appears.
2. In the
PLC/Controller Address
frame, enter the
PLC coil
or
controller address
. Or click the
PLC/Controller Address button
to display the Edit PLC/Controller Address dialog
box:
3. In the Reference Address area, click the pull-down box to select the
target PLC memory area
. Use the
numeric keypad to enter the specific
PLC memory address
. Select the
PLC Network Address
(if
applicable) and
HMI communications port
. Click
Enter
to go back to prior dialog box.
1010-0300, Rev 02
Using Dynamic Objects
85
