4
To enable/disable buzzer using BlueLeaf software
1. From the TOOLS menu, click
HMI Default Settings.
The HMI Default Setting dialog box appears.
2. In the Functional Settings frame, check the
Enable Buzzer Setting
box.
3. Click
OK
. Then download project to the OIT.
Setting the Menu Language
The BLU300 Local Setup menus and the BlueLeaf configuration software can be configured in English, Simplified Chinese
or Traditional Chinese.
4
To select language using the Local Setup menus:
1. Access the
LOCAL SETUP MENU
per instructions given in the beginning of this chapter.
2. Press the F4 key, or use the up/down arrow keys to move the blinking cursor to 4. HMI Setup, Press
the ENTER key.
3. Use the up/down arrow keys to move the blinking cursor to 6. Language. Press the Enter key.
4. From the Language menu, use te up/down arrow keys to highlight 1.English or 2.Trad. Chinese or
3.Simp. Chinese.
5. Press the ENTER key to save the change and go back to the HMI Setup menu. Press the ESC key to
cancel any changes.
*
This only changes the language used in the Local Setup menus, not the project in the unit.
Setting the Local Setup Password
The Password setting allows you to restrict access to the
LOCAL SETUP
menus.
4
To change the password, perform the following:
1. Access the
LOCAL SETUP MENU
per instructions given in the beginning of this chapter.
2. Press the
F4,
key or use the up/down arrow keys to move the blinking cursor to
4.HMI Setup
.
Press the
ENTER
key.
3. Use the up/down arrow keys to move the blinking cursor to
7.Password
. Press
Enter
.
4. From the
PASSWORD
menu, use the up/down arrow keys to move the blinking cursor to the parameter
you wish to change:
1. New password
or
2.Enable.
5. Press the
ENTER
key on
1.New password
. The Password Entry screen appears, showing the
current 4-digit password. The blinking cursor will now highlight the first digit of the password.
6. Use the right/left arrow keys to switch between the digits of the password, and then use the function
keys to change each digit value. The password can be any set of four digits and/or characters. To
enter digits or characters, each function key has assigned a set of password characters as follows:
F1:
1 6 A B C D E F
1010-0300, Rev 02
Basic Operation of the BLU300
55
