4. Apply power to the BLU300. The OIT will display the following:
5. Press the ENTER key on the OIT. The OIT will download the project to the memory stick, then
display the following:
6. Remove power from the BLU300 and remove the memory stick.
7. Power up the BLU300. The PCC will now have the project.
Copying a project from the PCC to the BLU300
1. Remove power from the BLU300.
2. Set the switch on the memory stick (PCC) to
PC
®
BLU
.
3. Insert the memory stick (PCC) into the extension slot in the back of the BLU300 with the slot guide
face up.
1010-0300, Rev 02
134
Blue Series Installation & Operation Manual
