Once the local setup menu is accessed, the following should be displayed on the BLU300:
Downloading a Project to the BLU300
4
To download a project to the BLU300, follow these steps:
1. Access the
LOCAL SETUP MENU
as shown above.
2. Connect the BLU300 RS-232 port to your computer using the configuration cable (Maple P/N
7431-0102)
3. In BlueLeaf, click
Options…PC-HMI Comm Settings
to select the PC’s com port and parameters.
4. Compile the project - click
Tools…Write Project to BLU300
.
5. On the BLU300, press the
F1
key or use the up/down arrow keys to move the blinking cursor to
1.Read from PC
. Then press the
ENTER
key:
5. In BlueLeaf, click the
Yes
button, to confirm the download. After the file has downloaded, click the
OK
button.
6. Press the
ESC
key on the BLU300 to exit the download menu.
7. Disconnect the OIT from the PC and connect the PLC cable to the OIT.
8. Press the
F5
key or use the up/down arrow keys to move the blinking cursor to
5.EXIT & RUN
, then
press the
ENTER
key.
The OIT will attempt to communicate to the PLC.
Uploading a Project from the BLU300
4
To upload a project from the BLU300, follow these steps:
1. Access the
LOCAL SETUP MENU
per instructions given in the beginning of this chapter.
2. Connect the BLU300 RS-232 port to your computer using the configuration cable (Maple P/N
7431-0102).
1010-0300, Rev 02
Basic Operation of the BLU300
49
