8. Open the file that contains the firmware update. Click
Open File
. The Open File dialog box appears.
Select the
file
and click
Open
.
9. The file date and time of creation should appear after selecting the file.
10. Start Firmware Update. Click
Start Burn
.
11. The progress bar will show file progress. Time Eliminate shows the elapsed tie and the R/T
(Receive/Transit) light will be blinking throughout the burn.
12. When the update is complete, disconnect power from the OIT and disconnect the cable from the
extension port. Reconnect the OIT configuration cable.
1010-0300, Rev 02
Using BlueLeaf Software
43
