LSI LSI53C896, Technical Manual

Page: 117 / 370

PCI Configuration Registers 4-5
Registers: 0x06–0x07
Status
Read/Write
Reads to this register behave normally. Writes are slightly different in that
bits can be cleared, but not set. A bit is cleared whenever the register is
written, and the data in the corresponding bit location is a one. For
instance, to clear bit 15 and not affect any other bits, write the value
0x8000 to the register.
DPE Detected Parity Error (from Slave) 15
This bit is set by the LSI53C896 whenever it detects a
data parity error, even if data parity error handling is
disabled.
SSE Signaled System Error 14
This bit is set whenever the device asserts the SERR/
signal.
RMA Received Master Abort (from Master) 13
A master device should set this bit whenever its
transaction (except for Special Cycle) is terminated with
Master Abort.
RTA Received Target Abort (from Master) 12
A master device should set this bit whenever its
transaction is terminated by target abort.
R Reserved 11
DT[1:0] DEVSEL/ Timing [10:9]
These bits encode the timing of DEVSEL/. These are
encoded as:
15 14 13 12 11 10 9 8 7 5 4 3 0
DPE SSE RMA RTA R DT[1:0] DPR R NC R
0 0 0 0 x 0 0 0 x x x 1 x x x x
0b00 fast
0b01 medium
0b10 slow
0b11 reserved
*