manualshive.com logo in svg

Infranor XtrapulsPac, User Manual

The Infranor XtrapulsPac is an advanced motion control system designed for precise automation applications. Ensure optimum performance and seamless integration by referring to the comprehensive user manual available for free download on our website. Master the product's features and functionalities effortlessly at manualshive.com.

Share
Download
background image

 

 

50

XtrapulsPac – User Guide 

Chapter 3 - Reference

• State Transition 7: READY TO SWITCH ON -> SWITCH ON DISABLED 

Event: 'Quick Stop' and ‘Disable Voltage’ command received from host. 
Action: None 

  
• State Transition 8: OPERATION ENABLE -> READY TO SWITCH ON 

Event: 'Shutdown' command received from host. 
Action: The power section is switched off immediately, and the motor is free to rotate if unbraked. 

  
• State Transition 9: OPERATION ENABLE -> SWITCH ON DISABLED 

Event: 'Disable Voltage' command received from host. 
Action: The power section is switched off immediately, and the motor is free to rotate if unbraked. 

  
• State Transition 10: SWITCHED ON -> SWITCH ON DISABLED 

Event: 'Disable Voltage' or 'Quick Stop' command received from host. 
Action: The power section is switched off immediately, and the motor is free to rotate if unbraked. 

  
• State Transition 11: OPERATION ENABLE -> QUICK STOP ACTIVE 

Event: 'Quick Stop' command received from host. 
Action: The quick stop function is executed. 

  
• State Transition 12: QUICK STOP ACTIVE -> SWITCH ON DISABLED 

Event: 'Quick Stop' is completed or 'Disable Voltage' command received from host. 
This transition is possible, if the Quick-Stop-Option-Code is different from 5 (stay in the state ‘Quick Stop Active’). 
Action: The power section is switched off. 

  
• State Transition 13: All states -> FAULT REACTION ACTIVE 

A fault has occurred in the drive. 
Action: Execute appropriate fault reaction. 

  
• State Transition 14: FAULT REACTION ACTIVE -> FAULT 

Event: The fault reaction is completed. 
Action: The drive function is disabled. The power section may be switched off. 

  
• State Transition 15: FAULT -> SWITCH ON DISABLED 

Event: 'Fault Reset' command received from host. 
Action: A reset of the fault condition is carried out if no fault currently exists in the drive. 
After leaving the state Fault the Bit 'Fault Reset' of the 

control word 

has to be cleared by the host. 

  
• State Transition 16: QUICK STOP ACTIVE -> OPERATION ENABLE 

Event: 'Enable Operation' command received from host. This transition is possible if the 
Quick-Stop-Option-Code is 5, 6, 7 or 8. 
Action: The drive function is enabled.

 

   

Objects definition 

  

Index Object 

Name 

Type 

Attr.

0x6040 

VAR 

Control Word 

Unsigned16  

rw 

0x6041 

VAR 

Status Word 

Unsigned16  

ro 

 
 

Summary of Contents for XtrapulsPac
















































































































































































































































Reviews:

No comments

Related manuals for XtrapulsPac

Fast CR-110 Application Manual preview
CR-110
Brand: Fast Pages: 3
Laney TFX3 Service Information preview
TFX3
Brand: Laney Pages: 7
Laney Richter Bass RB2 Instructions Manual preview
Richter Bass RB2
Brand: Laney Pages: 16
Laney LX15 User Manual preview
LX15
Brand: Laney Pages: 24
Laney EA120 User Manual preview
EA120
Brand: Laney Pages: 6
S.M.S.L DO400 User Manual preview
DO400
Brand: S.M.S.L Pages: 32
QUAD 99 Series Brochure & Specs preview
99 Series
Brand: QUAD Pages: 12
Galactron MK 2245 Owner'S Manual preview
MK 2245
Brand: Galactron Pages: 12
Camco Vortex 2.6 Owner'S Manual preview
Vortex 2.6
Brand: Camco Pages: 32
Monacor TXA-1020 Instruction Manual preview
TXA-1020
Brand: Monacor Pages: 34
Signal Vehicle Products SS741MG Installation And Operating Instructions Manual preview
SS741MG
Brand: Signal Vehicle Products Pages: 20
JDS Labs EL AMP II Operating Instructions preview
EL AMP II
Brand: JDS Labs Pages: 4
A SYSTEMS DMA8825 User Manual preview
DMA8825
Brand: A SYSTEMS Pages: 42
Kramer PT-101R User Manual preview
PT-101R
Brand: Kramer Pages: 6
Fender Acoustasonic 30 Operating Instructions Manual preview
Acoustasonic 30
Brand: Fender Pages: 16
Cloud CX-A450 Manual preview
CX-A450
Brand: Cloud Pages: 7
Marshall Electronics MD-0114-EQ Manual preview
MD-0114-EQ
Brand: Marshall Electronics Pages: 1
Sonic Frontiers Sonic Frontiers SFS-40 Operating Manual preview
Sonic Frontiers SFS-40
Brand: Sonic Frontiers Pages: 6

Brands by name

Popular brands

Load more brands