InfoPrint 5504-R40, User Manual

Page: 246 / 402

246
Chapter 3
ETHERNET PARAMS
ETHERNET PARAMS
ETHERNET PARAMS Submenus
NetBIOS Protocol
•
Enable (the default). The ethernet will respond to the NetBIOS protocol.
•
Disable . The ethernet does not recognize the NetBIOS protocol.
ASCII Data Port
This option allows you to set the port number for ASCII print jobs. The data
port number needs to match your host system setting.The range is 1023 -
65535.
IPDS Data Port (IPDS emulation only)
This option allows you to set the port number for IPDS print jobs.The range is
1023 - 65535.
ETHERNET
PARAMS
1
(from page 91)
NetBIOS
Protocol
Enable*
Disable
Offline
Process
Disable*
Enable
ASCII Data
Port
9100*
1023-65535
2
IPDS Data
Port
3
5001*
1023-65535
2
Keep Alive
Timer
3 Minutes*
2-10 Minutes
Ethernet
Speed
Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
Job Control
Standard*
Enhanced
Off
NOTES:
* = Factory Default
1
This menu appears only if the ethernet port is enabled or if the wireless ethernet
is installed.
2
Set the port number that works with your host system.
3
This menu appears only if the IPDS emulation is installed and activated.