InfoPrint 5504-R40, User Manual

Page: 334 / 402

334
Appendix A
Media
Table 19. Media - General Information
Type: Roll-fed, die-cut continuous or fanfold labels, tags or tickets;
most direct thermal or thermal transfer materials.
Supply Roll: 8 inch (203 mm) maximum diameter on 1.5-inch (37.5 mm) to
3-inch (76 mm) diameter cores.
Internal Rewinder: Accepts up to a 5-inch diameter roll of label backing.
Label Material: Thermal transfer plain-coated papers, vinyl, Mylar, metallized
paper, non-woven fabric, fine woven fabric, thermal-visible light
scannable paper, infrared scannable paper, thermal ticket/tag
stock, thermally-sensitive plastic stock.
Media Sensing: Horizontally moveable sensor assembly. When set to Mark, it
senses a black mark on the underside of tag or label stock.
When set to Advanced Gap, it detects die-cut labels on liner
media and notches and holes in tag stock. When set to
Advanced Notch, it detects notches or holes that interrupt a dark
or black area on the underside of the media. When set to
Disable, it senses no label indicators or ignores all existing label
length indicators on the installed media. Gap is an alternative to
Advanced Gap.
Label Taken Sensor: Detects when a printed label is at the printer exit throat. Used
only for Tear-Off and Peel-Off Media Handling modes.
Automatic Label Peel-Off: Peels and presents label to the operator, one at a time.
Automatic Label Peel-Off is supported only when the internal
rewinder is installed. (The internal rewinder is a factory- or
field-installed option.)