InfoPrint 5504-R40, User Manual

Page: 244 / 402

244
Chapter 3
ETHERNET ADDRESS
ETHERNET ADDRESS
ETHERNET ADDRESS Submenus
IP Address
This item allows you to set the IP Address for the TCP/IP protocol in four
three-digit segments (SEG1 through SEG4). If the IP Address is assigned by
Bootp, ARP or DHCP, it is dynamic and read-only.
The factory defaults for the SEG1 through SEG4 are 000, 000, 000, and 000.
NOTE: The printer reboots when it is placed online.
ETHERNET
ADDRESS
1
(from page 91)
IP Address
SEG1:
000*
0-255
Subnet Mask
SEG3:
000*
0-255
IP Address
SEG2:
000*
0-255
IP Address
SEG3:
000*
0-255
IP Address
SEG4:
000*
0-255
Subnet Mask
SEG1:
000*
0-255
Subnet Mask
SEG2:
000*
0-255
Subnet Mask
SEG4:
000*
0-255
Gateway
Address SEG1:
000*
0-255
Gateway
Address SEG2:
000*
0-255
Gateway
Address SEG3:
000*
0-255
Gateway
Address SEG4:
000*
0-255
MAC Address
xxxxxxxxxxxx
2
DHCP
Disable*
Enable
NOTES:
* = Factory Default
1
This menu appears only if the ethernet port is enabled.
2
You cannot change this value; it is a display only item.
BootP
Disable
Enable*