InfoPrint 5504-R40, User Manual

Page: 343 / 402

RFID
343
IPDS for Use with an Ethernet and Twinax Host Interface
This option supports the IPDS language to allow a LAN connection as well as
a direct connection of the printer to an IBM host computer that uses the twinax
data interface. This option is applicable to both non-RFID and RFID printers.
The printer may be ordered with this option installed and the required
hardware to support it, or it can be field installed by an authorized service
representative. The printer must have an ethernet, Coax/Twinax interface,
and a 300 DPI printhead installed to support this field installed option.
RS-422
An optional serial interface that enables the printer to operate with bit serial
devices that are compatible with an RS232 controller. The printer may be
ordered with an RS-422 serial interface installed or it can be installed by an
authorized service representative at a later date.
RFID
The RFID option permits encoding of Class 1 Gen 2 RFID tags and is
mounted inside the printer. The printer may be ordered with RFID installed, or
it can be field installed by an authorized service representative.
Radio Frequency Statements
RF Exposure
To comply with FCC and IC RF exposure requirements, the device is
approved for operation with a minimum separation distance of 20cm for
all persons.
Co-location
To comply with FCC part 15C and IC RSS 210 requirements, the device
must not be co-located or operating in conjunction with any other
transmitter or antenna other than those allowed by IBM for this device.
Antenna
Removal or alteration of the antenna could void FCC and IC approvals
and negate your authority to operate the product.
Intended Use
Non-specific short range device operating in the band 869.4 to 869.95 MHz
for Home and Office environment in E.E.A and Switzerland.
Please note that this device has been certified for residential use and may be
used in any environment.