InfoPrint 5504-R40, User Manual

Page: 252 / 402

252
Chapter 3
WLAN PARAMS
WLAN PARAMS Submenus
Signal Strength
This menu displays the strength of the wireless signal.
NOTE: This is a display value only and cannot be changed.
Operation Mode
Allows you to select the way the Wireless option communicates:
•
Infrastructure (the default). The Wireless option must go through an
Access Point.
•
Pseudo IBSS . Proprietary, peer-to-peer communication (without an
Access Point). The two peers must be specific to one manufacturer.
•
Ad Hoc . Standard, peer-to-peer communication (without an Access
Point). The two peers can be from different manufacturers.
SSID Name
A 1-32 character, case-sensitive string that identifies the Extended Service
Set Identification (ESS_ID) network the unit is part of. (ESS_ID is also called
NET_ID.) These characters can be alphanumeric, symbols, or spaces.
Reset SSID Name
Allows you to reset the SSID name.
WLAN
PARAMS
(from page 250)
NOTES:
* = Factory Default
5
A 1-32 character, case-sensitive string. Characters can be alphanumeric, symbols, or spaces.
6
This menu appears only if a Symbol LA5127 RF card is installed.
WPA
Mode
6
Disable*
Enable
WPA
Cipher
6
TKIP*
AES
TKIP+AES
Disable
WPA
P-Phs (01-15)
6
XXX
5
WPA P-Phs
(16-30)
6
WPA P-Phs
(31-32)
6
Reset WPA
P-Phs
6