InfoPrint 5504-R40, User Manual

Page: 76 / 402

76
Chapter 3
Overview
Specifying A Power-Up Configuration
You can specify any one of the nine configurations (1-8 or Factory) as the
power-up configuration:
1. Press the key until the following message displays:
2. Press the
↓
key until the following message displays:
3. Press the
+
or
−
key to cycle through the options (1-8 and Factory). When
the desired number displays, press the
↵
key to select it. The following
message displays:
NOTE: If the configuration number has not been saved previously, the
following error message displays:
If this error message displays, see “Saving A Configuration” on
page 74. Once you have saved a configuration, repeat the steps in
this procedure.
..
.
MENU MODE
CONFIG. CONTROL
Power-Up Config.
1*
Power-Up Config.
X *
CONFIG. DOES NOT
EXIST/Save First