InfoPrint 5504-R40, User Manual

Page: 253 / 402

WLAN PARAMS Submenus
253
Min Xfer Rate
Allows you to set the minimum speed at which the Wireless Option will accept
a connection (in millions bits per second). The options are Auto-negotiate,
1Mb/sec., 2Mb/sec., 5.5Mb/sec., and 11Mb/sec.
The factory default is Auto-negotiate.
Channel
Allows you to select the RF channel.
The options are Default (the factory default) and 1-15.
Ant. Diversity (802.11b only) or Antenna (802.11b/g)
The RF antenna to use:
•
Diverse (the default). Select when you want to use the antenna with the
best reception. (802.11b only)
•
Primary . Select when you want to use the Primary antenna on the RF
card. (802.11b and 802.11 b/g) Default setting for 802.11b/g.
•
Auxiliary . Select when you want to use the Auxiliary antenna on the RF
card. (802.11b and 802.11 b/g)
Preamble
The length of the preamble in transmit packets.
•
Default (the default). The Wireless option automatically determines the
length.
•
Short . For newer printers which can handle higher transfer rate speeds.
•
Long . For older printers, which cannot handle higher transfer rate
speeds.
Power Mgmt
This allows you to set power-save mode and sleep time. A value specifying
the sleep time in milliseconds will be provided. If set to zero, power-save
mode will be disabled.
The range is 0-1000 ms., and the factory default is 0 ms.
Transmit Power
The power level as a percentage of full power.
The range is 0 - 100%, and the factory default is 100%.
Internat. Mode
When enabled, the Wireless option adapts to international frequency
requirements in Europe.
The options are Disable (the factory default) and Enable.