HP 8568B, Performance Tests And Adjustments Manual, Page: 221 / 313

14. 249 MHz Phase Lock Oscillator Adjustments
14. 249 MHz Phase
Lock Oscillator
Adjustments
Reference
Description
Equipment
RF Section:
249 MHz Phase Lock Oscillator
Two center frequencies are chosen: one which will tune the 249 MHz
Oscillator to its low-end frequency and one which will tune the 249
MHz Oscillator to the high-end frequency. The voltage is monitored
with a DVM at the output of the oscillator, and the oscillator
frequency is adjusted to produce the proper dc voltage output for
each frequency (low-end and high-end). Next, the 500
Trap is
adjusted to null the 500 sidebands using the sixth harmonic of the
249 MHz signal.
ANALYZER
DIGITAL VOLTMETER SPECTRUM ANALYZER
J
Figure 3-59. 249 MHz Phase Lock Oscillator Adjustments Setup
Spectrum Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . HP
Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HP
Digital Voltmeter (DVM) . . . . . . . . . . . . . . . . . . . . . . . . HP
Tee, SMB Male . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP 1250-0670
Adapters:
Type N (m) to BNC (f) . . . . . . . . . . . . . . . . . . . . . . . . . 1250-1250
Cables:
BNC cable, 122 cm (48 in) (2 required) . . . . . . . . . . . .
BNC to SMB Snap-On cable (2 required) . . . . . . 85680-60093
Adjustments