HP 8568B, Performance Tests And Adjustments Manual, Page: 16 / 313

Operation Verification
A high confidence level in the instrument’s operation can be achieved
by running only the Operation Verification Program, since it tests
most of the instrument’s specifications. It is recommended that the
Operation Verification Program be used for incoming inspection and
after repairs, since it requires much less time and test equipment.
A description of the program can be found in the Installation and
Verification manual.
Option 462
Option 462 instruments require that the performance tests and
Instruments
adjustment procedures listed below be performed instead of their
standard versions included in chapters two and three. Information on
Option 462 versions are located in Chapter 4, Option 462.
6 Bandwidths:
Test 4, 6 Resolution Bandwidth Accuracy Test
Test 5, 6 Resolution Selectivity Test
Adjustment 9, 6 Bandwidth Adjustments
Impulse Bandwidths:
Test 4, Impulse and Resolution Bandwidth Accuracy Test
Test 5, Impulse and Resolution Selectivity Test
Test 6, Impulse and Resolution Bandwidth Switching Uncertainty
Test
Adjustment 9, Impulse Bandwidth Adjustments
Option 857
Option 857 instruments require that the performance test procedure
Instruments
listed below be performed instead of the standard version included in
Chapter 2. Information on Option 857 is located in Chapter 5, Option
8 5 7 .
Test 12, Option 857 Amplitude Fidelity Test
General Information