GE Power Management
ALPS Advanced Line Protection System
10-13
10 ALPS TEST PROGRAM
10.6 TOOLS MENU
10
10.6 TOOLS MENU
10.6.1 DESCRIPTION
There is one menu item Setup. Click on Setup and the following dialog box is displayed.
Figure 10–18: TOOL SETUP DIALOG BOX
The Remove button and the Command line and Menu text boxes are disabled, and that the focus is set to the Add but-
ton.
Type the Enter key or click on the Add button. The Add Tool dialog box is displayed. This is a standard MS-Windows dia-
log box. Select an executable windows program and click on the OK button.
•
The full path and name is in the Command line text box
•
The program name less the extension is in the Menu text box
•
The program name less the extension is the Menu contents list box
•
The Remove button is enabled
•
The focus is set to the Menu text box.
Change the text in the Menu text box to text suitable for the tools menu. Click anywhere in the Command line text box.
•
Verify that the new menu name is displayed in the Menu contents list box.
Change the command line so that it is invalid (for example, remove a character from the program name). Click on the OK
button. Pull down the Tools menu.
Verify the following:
•
There is one tool followed by a separator bar and the Setup menu item.
•
The tool's name is correct.
Click on the tool.
•
Verify that an error message is displayed indicating that the program couldn't be started.
Select the Setup menu item again.
•
The focus is set to the first item in the Menu contents list box.
•
The menu text is in the Menu text box.
•
The Command line text box has the invalid path name.
Change the path name to the correct path. Click on the OK button. Pull down the Tools menu and click on the tool.
•
Verify that the program started.
Select the Setup menu item again. Add a second tool.
•
Verify that the tool gets added after the first tool.
