Fujitsu ETERNUS SF Express V16.6 Migration Manual Download

Page: 327 / 378

Information

Notation in Procedure

Directory Name

Explanation

$BAK_DIR

Backup destination directory.

$INS_DIR

"Program Directory" specified at the ETERNUS SF Manager installation.

Execute the following command with administrator privileges for the operating system.
The

backupFileName

is the file name specified when the backup data was created.

$INS_DIR\LM\bin\esflm restore $BAK_DIR\LM\backupFileName

A.22 Restoring License Management Database (for Solaris, Linux)

Restore the license management database.

Information

Notation in Procedure

Directory Name

Explanation

$BAK_DIR

Backup destination directory.

Execute the following command with administrator privileges for the operating system.
The

backupFileName

is the file name specified when the backup data was created.

/opt/FJSVesflm/bin/esflm restore $BAK_DIR/LM/backupFileName

A.23 Backup of Express Operational Environment

Follow the procedure below to save the environment for the Express's manager.

Information

Notation in Procedure

Directory Name

Explanation

$BAK_DIR

Backup destination directory.

$INS_DIR

The directory in which the Express's manager has been installed

Stop the service.
With the Windows services screen, stop the following 4 services:

ETERNUS SF Express Manager

ETERNUS SF Express Apache Service

ETERNUS SF Express Tomcat Service

ETERNUS SF Storage Cruiser Manager

- 303 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Search results

Summary of Contents for ETERNUS SF Express V16.6

Reviews:

Related manuals for ETERNUS SF Express V16.6

Brands by name

Popular brands

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Search results

Summary of Contents for ETERNUS SF Express V16.6

Reviews:

Related manuals for ETERNUS SF Express V16.6

Brands by name

Popular brands