function of Storage Cruiser with an absolute path. When the performance management function is not backed up, it is
unnecessary to specify a directory for the
tmpDir
.
# /mnt/dvd/Manager_unix/vuptools/esfpostinst_cluster.sh backupDir [tmpDir] -secondary
When the restore fails, after confirming the output error message and removing the cause of the failure, execute the
command again.
Point
-
Spaces and the characters " / ` * ? \ $ [ ] , % ! { } are not supported for directory names.
-
The number of characters in a directory name must be up to 220.
f.
Unmount the shared disk for shared data of ETERNUS SF Manager.
If it is required for the work on the primary node, mount it on the primary node.
g.
Change to a directory other than the DVD-ROM.
Example:
# cd
h.
Unmount the DVD-ROM.
Example:
# umount /mnt/dvd
i.
Eject the DVD-ROM.
3.
Symfoware should only be installed in cases where it was used by ETERNUS SF Manager only.
The procedures to uninstall Symfoware are stated below.
a.
Start the uninstaller of Symfoware to delete the Symfoware package.
Before deleting the package, confirm that none of the package functions used by any system other than ETERNUS SF
Manager.
# /opt/symfoware/setup/symfo_remove
b.
Confirmation message to uninstall Symfoware is displayed. To perform the uninstallation, enter "y". To cancel the process,
enter "q".
When "y" is entered, a message allowing to select the function to uninstall is shown. Input "all" or "number to delete" to
select the function to uninstall.
A message to re-confirm uninstallation appears. Enter "y" to perform the uninstallation and "q" when it is not required.
Example of Uninstallation with the Specification "all"
Start checking the installation environment.
Check of installation environment is ended.
WARNING: There is a possibility that another product uses "Symfoware Server Enterprise
Edition".
Continue the uninstallation?
y: Continue the uninstallation
q: End directly without uninstallation
[y,q]: y
Uninstallation of "Symfoware Server Enterprise Edition" begins.
Please select the functions to be uninstalled.
1: Base function (Server function, Client function)
Separate multiple selections with ",". (Example: 1, 2)
[all:All functions,1,q]: all
- 160 -
