Fujitsu ETERNUS SF Express V16.6 Migration Manual Download | Manualshive

Page: 67 / 378

background image

-

Move the files (

tmpDir

) related to the performance management function to the same logical drive as the drive on

which the product of the previous version is installed. In the case of backup to a different logical drive, it may take time
to perform backup and restore.

6.1.1.1.2 Checking for Available Disk Space

Ensure that there is enough available disk space on the server where the upgrade is performed.
The required disk space for the upgrade is calculated as the "Required Disk Space for New Version" minus the "Required Disk Space for
Previous Version".

Required Disk Space for New Version

The space required to install this version of the ETERNUS SF Manager.
Refer to "Operating Environment of ETERNUS SF Manager" in the

ETERNUS SF Installation and Setup Guide

for this version for

information on the required disk space.

Required Disk Space for Previous Version

The space required to install the previous version of the ETERNUS SF Manager.
Refer to "Operating environment of ETERNUS SF Manager" in the

ETERNUS SF Installation and Setup Guide

for the relevant previous

version for information on the required disk space.

6.1.1.1.3 Uninstalling Incompatible Software

Check if any incompatible software for this version of the ETERNUS SF Manager is installed on the server where the upgrade is
performed.
If incompatible software is found, refer to the relevant software manual and uninstall it before starting the upgrade.

See

Refer to "Operating Environment of ETERNUS SF Manager" in the

ETERNUS SF Installation and Setup Guide

for this version for

information on the incompatible software.

6.1.1.1.4 Estimating Database Size

A database is necessary for this version of Storage Cruiser.
The database size must be estimated before starting the upgrade.

See

Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the

ETERNUS SF Installation and Setup Guide

for this version

for details.

6.1.1.1.5 Preparing for Uninstallation

Refer to "

A.7 Unsetting Up Database

" to unsetup the repository database of the previous version.

6.1.1.2 Performing Upgrade

Refer to "

C.1 Procedures for Upgrade Installation of Manager Feature of Express / Storage Cruiser / AdvancedCopy Manager Version 14.x

and 15.x (for Windows)

" to perform the upgrade.

Information

When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below.

1.

Install the target version.

2.

If the installation is successfully completed, continue from "

6.1.1.3 Tasks to Be Performed After Upgrade

- 43 -

«
...
65
66
67
68
69
...
»

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS SF Express V16.6

Brand: Sans Digital Pages: 2

Brand: Patiowell Pages: 38

Brand: Linksys Pages: 43

DUOTECH HIGH-STORE+

Brand: Keter Pages: 31

Brand: Qualstar Pages: 8

Brand: Addonics Technologies Pages: 8

Brand: HOGYME Pages: 31

Brand: AEG Pages: 16

Brand: Argosy Pages: 1

Brand: Samsung Pages: 2

M378A5244CB0-CTD

Brand: Samsung Pages: 9

Brand: Samsung Pages: 19

Brand: Samsung Pages: 21

Brand: EDSLab Pages: 24

SO MOBILE OTB HELLO KITTY

Brand: DANE-ELEC Pages: 2

Brand: HP Pages: 1

Brand: HP Pages: 1

Brand: HP Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands