manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 197

Edit the following environment setting files for Managed Server transaction on the shared disk for shared data:

-

<

Drive of shared disk for shared data of Managed Server transaction

>:\etc\opt\swstorage\clsetup.ini

-

<

Drive of shared disk for shared data of Managed Server transaction

>:\etc\opt\swstorage\etc\swstg.ini

Change the version information within each file, as follows:

 

Upgrade Patterns

Descriptive Contents of Version Information

Before

After

Version 15.0B to 16.6

Version=V15.0

Version=V16.6

Version 15.1 to 16.6

Version=V15.1

Version 15.2 to 16.6

Version=V15.2

Version 15.3 to 16.6

Version=V15.3

 

 Note

Do not change anything other than the version information.

9.3.2.4  Performing Upgrade (Secondary Node)

Perform the upgrade for the secondary node.

The upgrade procedure is the same as that for the primary node. Refer to "

9.3.2.2 Performing Upgrade (Primary Node)

".

 

 Point

If this secondary node acts as a primary node for other Managed Server transactions, it is upgraded as a primary node, so this procedure
is not needed.

9.3.2.5  Tasks to Be Performed After Upgrade (Secondary Node)

There is no further action required after the upgrade for the secondary node.

9.3.2.6  Starting Managed Server Transactions

Perform the following procedure:
Note that in these tasks, in addition to operations with the Managed Server, there are operations to execute from the Management
Server and Web Console.

1.

On the primary node, start the Managed Server transactions.

Use the Failover Cluster Manager to start the Managed Server transactions.
If multiple Managed Server transactions exist, perform this procedure for each Managed Server transaction.

2.

In all of the nodes in which the Storage Cruiser's agent has been installed, start the service of the Storage Cruiser's agent. Refer
to "Starting and Stopping Agent" in the 

ETERNUS SF Storage Cruiser Operation Guide

 for information on how to start the service.

3.

Start the local transactions on all the nodes, perform the following procedure:

a.

Select Control Panel > Administrative Tools > Services to open the Windows Services screen.

b.

Select "AdvancedCopy Manager COM Service" and then click Start.

4.

To  ensure  data  consistency,  with  the  Management  Server,  execute  the  stgxfwcmmodsrv  command  to  change  the  server
information.

When executing the stgxfwcmmodsrv command, specify the Managed Server name for the -n option.

- 173 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands