Continue the uninstallation?
y: Continue the uninstallation
q: End directly without uninstallation
[y,q]: y
Uninstallation of "Symfoware Server Enterprise Edition" begins.
Please select the functions to be uninstalled.
1: Base function (Server function, Client function)
Separate multiple selections with ",". (Example: 1, 2)
[all:All functions,1,q]: all
Selected functions
- Base function (Server function, Client function)
Start the uninstallation of the above functions?
y: Uninstallation begins
n: Select the functions again
q: End directly without uninstallation
[y,n,q]: y
Uninstallation begins.
d.
The following message is displayed after the Symfoware uninstallation is completed normally.
Uninstallation of "Symfoware Server Enterprise Edition" is ended normally.
2.
Perform the kernel parameter tuning.
See
Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this
version for information on tuning.
3.
As required, start the daemon of ETERNUS SF Manager.
If the operating system is not restarted after having performed kernel parameter tuning in step 2, execute the following
command to start the ETERNUS SF Manager daemon.
# /opt/FJSVesfcm/bin/startesf.sh
4.2.4 Resuming Operation
When the tasks described above have been performed, the upgrade of Express is complete. Restart operation after performing the
following actions.
1.
Changing SELinux Setting to "enforcing" Mode
When you change the SELinux setting to "enforcing" mode during the upgrade, refer to the following section in the chapter "Setup
of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this version and restart the operation after the
installation of the SELinux policy module for snmptrapd.
-
"Setup of Express's Manager" > "SNMP Trap Setting" > "SNMP Trap Setting (for Linux)" > "Installation of SELinux Policy Module
for SNMP Trap Daemon"
2.
Deleting Web Browser's Cache
If operating Web Console from the same web browser as before the upgrade, delete the web browser's cache prior to operation.
3.
Reloading Server Information
If all the following conditions are satisfied, this procedure is not required:
-
The pre-upgrade environment is Version 16.3.
- 26 -
