This operation should be performed on the primary node for Management Server transactions.
If multiple Managed Server transactions exist, perform this procedure for each Managed Server transaction.
Note
For changing the server information, start a new window for command execution, and then perform the procedure on the
window.
See
Refer to "Command References" in the
ETERNUS SF AdvancedCopy Manager Operation Guide (for Windows)
for this version for
information on the command.
6.
Import the configuration information.
Import the configuration information from the previous version by executing the
Administrator permissions.
Check that the managed devices and servers can be accessed before executing the
programDir\Common\bin\esfadm devconf import -all
After executing the
command, confirm that the IMPORT STATUS column displays "Complete" with
command.
In addition, confirm that "Complete" is displayed in STATUS column of the import status of the migration target resources. When
"Failed" is displayed, the import of configuration information has failed. Refer to "
12.2 What to Do When Error Occurs
" to take the
corrective action.
Note
When executing the
command, if a managed device or server is not accessible, the
command should be re-executed since the device configuration information is not imported.
7.
Uninstalling Symfoware
In the version level of this ETERNUS SF Manager, Symfoware is not used.
Symfoware should only be installed in cases where it was used by ETERNUS SF Manager only.
The procedures to uninstall Symfoware are stated below.
-
Uninstall Symfoware from the Add or Remove Programs or Programs and Features page.
If both Symfoware Server and Symfoware Client are installed, uninstall Symfoware Client first.
Point
-
If the ETERNUS VASA Provider was being used with the previous version
It is necessary to reinstall a version of the ETERNUS VASA Provider that supports this version.
-
If the Fujitsu ETERNUS Storage Systems Monitoring Pack was being used with the previous version
It is necessary to reinstall a version of the Fujitsu ETERNUS Storage Systems Monitoring Pack that supports this version.
9.1.2.5 Tasks to Be Performed After Upgrade (Secondary Node)
The tasks below need to be performed on the secondary node.
1.
Check that the ETERNUS SF Manager services are stopped.
If not stopped, use the Failover Cluster Manager to stop the transactions of ETERNUS SF Manager.
- 145 -
