manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 163

9.1.1.3.2  Importing Configuration Information

Import the configuration information from the previous version by executing the 

esfadm devconf import

 command using Administrator

permissions.

Check that the managed devices and servers can be accessed before executing the 

esfadm devconf import

 command.

programDir\Common\bin\esfadm devconf import -all

After executing the 

esfadm devconf import

 command, confirm that "Complete" is displayed in IMPORT STATUS column in the 

esfadm

devconf importstatus

 command.

In addition, confirm that "Complete" is displayed in STATUS column of the import status of the migration target resources. When
"Failed" is displayed, the import of configuration information has failed. Refer to "

12.2 What to Do When Error Occurs

" to take the

corrective action.

 

 Note

When executing the 

esfadm devconf import

 command, if a managed device or server is not accessible, the 

esfadm devconf import

command should be re-executed since the device configuration information is not imported.

9.1.1.3.3  Change Associated Software

If the following related software was being used with the previous version, it is necessary to update these to a version that supports
this version.

-

ETERNUS VASA Provider

-

Fujitsu ETERNUS Storage Systems Monitoring Pack

 

 Note

If operating Web Console from the same web browser as before the upgrade, delete the web browser's cache prior to operation.

9.1.1.3.4  Deleting Backup Data

Once normal operation has been confirmed after the upgrade, the backup data in the backup destination directory created in step 4
of "

9.1.1.1.1 Backing Up Operational Environment of Previous Version

" maybe deleted.

9.1.1.3.5  Uninstalling Symfoware

In the version level of this ETERNUS SF Manager, Symfoware is not used.
Symfoware should only be installed in cases where it was used by ETERNUS SF Manager only.

The procedures to uninstall Symfoware are stated below.

-

Uninstall Symfoware from the Add or Remove Programs or Programs and Features page.
If both Symfoware Server and Symfoware Client are installed, uninstall Symfoware Client first.

9.1.2  Upgrading on Clustered Systems

The following values are used in the description.

 

Directory Name

Explanation

$INS_DIR

"Program Directory" specified at the ETERNUS SF Manager installation.

$ETC_DIR

"Environment Directory" specified at the ETERNUS SF Manager installation.

9.1.2.1  Preparing for Upgrade

 

- 139 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands