manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 208

7.

9.5.7 Restoring Management Information

8.

9.5.8 Updating Version Information

9.5.1  Backing Up Repository Data

Refer to the following sections to back up the repository data on the Management Server (only when the Managed Server is operated
in a clustered system).

 

OS Type of Management Server

Reference

Windows

A.1 Backing Up Repository Data (for Windows)

Solaris,
Linux

A.2 Backing Up Repository Data (for Solaris, Linux)

9.5.2  Backing Up Management Information

Refer to "

A.5 Backing Up Management Information (for HP-UX, AIX)

" to back up the management information on the Managed Server.

9.5.3  Uninstalling Previous Version

Uninstall the previous version by referring to the relevant previous version manual.

 

For Non-clustered Systems

 

 Note

For the procedures below, be careful not to perform the procedure "Deletion of all Managed Servers".

Perform the procedures for "Stopping services/daemons" in the 

ETERNUS SF Installation and Setup Guide

.

 

For Clustered Systems

If clustered systems are used for Managed Servers as Managed Server transactions, perform the unsetup of cluster settings before
performing uninstallation.

 

 See

Refer to "Deletion of Cluster Environment for Managed Server Transactions" in the 

ETERNUS SF Cluster Environment Setup Guide

 for the

previous version for information on the unsetup of cluster settings.

9.5.4  Installing This Version

Install the AdvancedCopy Manager's agent of this version, and setup the operating environment.

 

About Installation

-

For non-clustered systems:

Refer to "Installation of AdvancedCopy Manager's Agent" in the 

ETERNUS SF Installation and Setup Guide

 for this version to install

the AdvancedCopy Manager's agent.

-

For clustered systems:

Refer to "Installation of ETERNUS SF Agent" in the 

ETERNUS SF Cluster Environment Setup Guide

 for this version to install the

AdvancedCopy Manager's agent.

 

- 184 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands