manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 87

the function to uninstall. 
A message to re-confirm uninstallation appears. Enter "y" to perform the uninstallation and "q" when it is not required.

Example of Uninstallation with the Specification "all"

Start checking the installation environment.

Check of installation environment is ended.

WARNING: There is a possibility that another product uses "Symfoware Server Enterprise 

Edition".

Continue the uninstallation?

y: Continue the uninstallation

q: End directly without uninstallation

[y,q]: y

Uninstallation of "Symfoware Server Enterprise Edition" begins.

Please select the functions to be uninstalled.

1: Base function (Server function, Client function)

Separate multiple selections with ",". (Example: 1, 2)

[all:All functions,1,q]: all

Selected functions

- Base function (Server function, Client function)

Start the uninstallation of the above functions?

y: Uninstallation begins

n: Select the functions again

q: End directly without uninstallation

[y,n,q]: y

Uninstallation begins.

3.

The following message is displayed after the Symfoware uninstallation is completed normally.

Uninstallation of "Symfoware Server Enterprise Edition" is ended normally.

4.

When FSUNiconv package is installed, delete it (only in the Solaris environment).
Delete after confirming that this package function is used only by ETERNUS SF Manager.

# pkgrm FSUNiconv

Subsequently, go to "

6.2.3 Resuming Operation

".

6.2.2  Upgrading on Clustered Systems

 

 Note

If Cluster Unsetup is executed after upgrading from Version 15.0B to this version, the cluster resources and scripts created by the old
version's commands starting with "stgclset" are not deleted.

6.2.2.1  Manual Backing Up Operational Environment

The following information is not backed up automatically. Back up the following information of the previous version manually:

-

Performance monitoring

If  the  performance  monitoring  was  performed  with  the  previous  version,  refer  to  the  following  information  related  to  the
performance monitoring with Web Console of the previous version and record the configuration information of the previous
version.

- 63 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands