manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 160

Chapter 9  Upgrade from AdvancedCopy Manager Version 15.x

To upgrade AdvancedCopy Manager's manager to this version, install the ETERNUS SF Manager.

If  performing  an  upgrade  to  a  system  environment  using  Agent-based  operation  model,  perform  the  upgrade  in  the  following
sequence:

1.

AdvancedCopy Manager's manager

2.

AdvancedCopy Manager's agent

 

 Point

-

In the version level of the AdvancedCopy Manager, there are conditions for the combination of manager and agent. Upgrade your
version, in order to fulfill the combination that is described in "Notes on Combining Different Versions" of the 

ETERNUS SF Release

Guide

.

-

If Storage Cruiser and AdvancedCopy Manager Copy Control Module are both installed on the same server, when upgrading, both
Storage Cruiser and AdvancedCopy Manager Copy Control Module are upgraded at the same time. Therefore, perform backups of
the previous versions before starting the upgrade.

-

The following information cannot be imported from the previous version:

-

Operation History

-

Events

-

Login/Logout history

-

It is possible to perform an Upgrade Installation with existing Advanced Copy and Remote Advanced Copy sessions. Regardless of
whether there are Advanced Copy sessions or not, the upgrade procedure is the same.

9.1  Upgrading AdvancedCopy Manager's Manager (for Windows)

9.1.1  Upgrading on Non-clustered Systems

9.1.1.1  Preparing for Upgrade

 

 Point

It is recommended that you back up the system before starting the upgrade. If a failure occurs during the upgrade, you cannot restore
the environment to the pre-installation status (rollback).

When returning back to the state before installation of the upgrade, recover (restore) the system from the backup.

9.1.1.1.1  Backing Up Operational Environment of Previous Version

With the following steps, perform a backup of the operation environment of the previous version of the AdvancedCopy Manager's
manager.

Refer to "

A.33 Capacity Necessary for Backup of Previous Version

" for information on the capacity required to perform a backup.

1.

Log on to the server using Administrator privileges.

2.

Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into the
DVD-ROM drive.
Refer to "DVD-ROM Contents" in the 

ETERNUS SF Installation and Setup Guide

 for this version for information on the DVD-ROM

structure and detailed contents.

- 136 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands