Fujitsu ETERNUS SF Express V16.6, Migration Manual

Page: 96 / 378

After executing the esfadm devconf import command, confirm that "Complete" is displayed in IMPORT STATUS column in the
esfadm devconf importstatus command.
In addition, confirm that "Complete" is displayed in STATUS column of the import status of the migration target resources. When
"Failed" is displayed, the import of configuration information has failed. Refer to "
12.2 What to Do When Error Occurs " to take the
corrective action.
Point
The communication method between this product and fibre channel switch (Fabric OS v6.3 or later) has been changed from
telnet to SSH. If the SSH feature is disabled on the targeted switch, enable the SSH feature. Refer to the manual provided by the
equipment for details on setting the SSH feature.
Note
When executing the esfadm devconf import command, if a managed device or server is not accessible, the esfadm devconf
import command should be re-executed since the device configuration information is not imported.
8.
Symfoware should only be installed in cases where it was used by ETERNUS SF Manager only.
The procedures to uninstall Symfoware are stated below.
a.
Start the uninstaller of Symfoware to delete the Symfoware package.
Before deleting the package, confirm that none of the package functions used by any system other than ETERNUS SF
Manager.
# /opt/symfoware/setup/symfo_remove
b.
Confirmation message to uninstall Symfoware is displayed. To perform the uninstallation, enter "y". To cancel the process,
enter "q".
When "y" is entered, a message allowing to select the function to uninstall is shown. Input "all" or "number to delete" to
select the function to uninstall.
A message to re-confirm uninstallation appears. Enter "y" to perform the uninstallation and "q" when it is not required.
Example of Uninstallation with the Specification "all"
Start checking the installation environment.
Check of installation environment is ended.
WARNING: There is a possibility that another product uses "Symfoware Server Enterprise
Edition".
Continue the uninstallation?
y: Continue the uninstallation
q: End directly without uninstallation
[y,q]: y
Uninstallation of "Symfoware Server Enterprise Edition" begins.
Please select the functions to be uninstalled.
1: Base function (Server function, Client function)
Separate multiple selections with ",". (Example: 1, 2)
[all:All functions,1,q]: all
Selected functions
- Base function (Server function, Client function)
Start the uninstallation of the above functions?
y: Uninstallation begins
n: Select the functions again
q: End directly without uninstallation
- 72 -