manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 126

Upgrade Patterns

Descriptive Contents of Version Information

Before

After

Version 16.4 to 16.6

Version=V16.4

Version 16.5 to 16.6

Version=V16.5

 

 Note

Do not change anything other than the version information.

4.

Recover the activation suspension script of Management Server tasks saved during "

7.2.2.1 Preparing for Upgrade

".

5.

In cases when Managed Server transaction coexist in the cluster system, recover the AdvancedCopy Manager daemon start and
stop script of the Managed Server transaction evacuated of "

7.2.2.1 Preparing for Upgrade

".

6.

If the SNMP Trap XML definition file is customized in the environment of the previous version, it is necessary to customize this
version as well.
Save the SNMP Trap XML definition file that is stored in the following directory to an arbitrary location.
After that, refer to "SNMP Trap XML Definition File" in the 

ETERNUS SF Storage Cruiser Operation Guide

 and customize the SNMP

Trap XML definition file. For the contents of the customization, refer to the SNMP Trap XML definition file which was saved to the
arbitrary location.

 

Directory of Location of Customization Definition files

/etc/opt/FJSVssmgr/current/snmpth/

7.

If the polling service setting file is customized in the environment of the previous version, it is necessary to customize this version
as well.
Save the polling service setting file that is stored in the following directory to an arbitrary location.
After that, refer to "Polling Service Setting File" in the 

ETERNUS SF Storage Cruiser Operation Guide

 and customize the Polling

Service Setting file. For the contents of the customization, refer to the polling service setting file which was saved to the arbitrary
location.

 

Customization Definition files

/etc/opt/FJSVssmgr/current/polling/pollingService.xml

8.

As required, perform the SNMP Trap configuration (for Linux only).

Only when the FJSVswstt package is installed using the procedure described in the step 10 of "

7.2.2.1 Preparing for Upgrade

",

perform the operation described in the following section in "Setup of ETERNUS SF Manager" in the 

ETERNUS SF Installation and

Setup Guide

 for this version.

-

"Setup of Storage Cruiser's Manager" > "SNMP Trap Setting" > "SNMP Trap Setting (for Linux)" > Step 4 in "When Using ETERNUS
SF SNMP Trap Monitoring Daemon"

9.

Perform the kernel parameter tuning.

 

 See

Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for this

version for information on tuning.

7.2.2.5  Tasks to Be Performed After Upgrade (Secondary Node)

The tasks below need to be performed on the secondary node.

- 102 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands