manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 179

h.

Unmount the DVD-ROM.
Example:

# umount /mnt/dvd

i.

Eject the DVD-ROM.

12.

Checking for available disk space

Ensure that there is enough available disk space on the server where the upgrade is performed.
The required disk space for the upgrade is calculated as the "Required Disk Space for New Version" minus the "Required Disk Space
for Previous Version".

Required Disk Space for New Version

The space required to install this version of the ETERNUS SF Manager.
Refer to "Operating Environment of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for this version for

information on the required disk space.

Required Disk Space for Previous Version

The space required to install the previous version of the ETERNUS SF Manager.
Refer to "Operating environment of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for the previous

version for information on the required disk space.

13.

Uninstalling incompatible software

Check if any incompatible software for this version of the ETERNUS SF Manager is installed on the server where the upgrade is
performed.
If incompatible software is found, refer to the relevant software manual and uninstall it before starting the upgrade.

 

 See

Refer to "Operating Environment of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for this version for

information on the incompatible software.

14.

Confirming the port number for the communication service

Therefore, ensure the new ports are available before starting the upgrade.

 

 See

Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for this

version for information on port numbers.

15.

Perform the kernel parameter tuning on the secondary node.

Therefore, perform the necessary kernel parameter tuning before starting the upgrade.

 

 See

Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for this

version for information on tuning.

16.

In cases when Managed Server transactions coexist in the cluster system, move the AdvancedCopy Manager daemon start and
stop script of the Managed Server transactions to a backup location.

On the primary node and the secondary node, move the AdvancedCopy Manager daemon start and stop script of the Managed
Server transactions to a backup location.

17.

Performing the cluster unsetup

Refer to "Uninstallation of ETERNUS SF Manager" in "Deletion of Cluster Environment for Management Server Transactions" in the

ETERNUS SF Storage Cruiser Installation Guide

 for the relevant previous version to delete unnecessary resources.

- 155 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands