Home
/
Fujitsu
/
ETERNUS SF Express V16.6
/
Migration Manual

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share

Page: 258 / 378

Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 258

| ETERNUS SF AdvancedCopy Manager |

| 16.6 |

| Copyright FUJITSU LIMITED 2013-2017 |

+-----------------------------------------------------------+

Welcome to Setup.

This program will install "AdvancedCopy Manager" on your system.

6.

A confirmation message is displayed before uninstalling the previous version. To uninstall the previous version and proceed with
the new installation, enter "y". To cancel the installation, enter "q". Press Enter.

An old version is installed in this system.

Do you want to upgrade? [y,q]:

7.

If "y" was entered for step 6, the upgrade continues.

If the upgrade completes successfully, the following message is displayed.

swsetup: AdvancedCopy Manager was installed successfully.

8.

Execute the following commands, and then eject the DVD-ROM.

# cd /

# umount dvdromMountPoint

When the tasks described above have been performed, the upgrade of the AdvancedCopy Manager's agent is complete.

Refer to "

10.4.1.4 Tasks to Be Performed After Upgrade

" to setup the AdvancedCopy Manager's agent.

Point

If the upgrade was terminated abnormally, refer to "

11.3.6 In Case of Problem During Upgrade of AdvancedCopy Manager's Agent (for

Solaris, Linux)

" to recover the system to the normal state.

10.4.1.3 Upgrade with Silent Installation Tasks

The upgrade is performed as follows:

1.

10.4.1.3.1 Performing Upgrade with Silent Installation Procedure

2.

10.4.1.3.2 Confirming Results of Upgrade with Silent Installation

10.4.1.3.1 Performing Upgrade with Silent Installation Procedure

Note that if step 1 through step 3 have already been performed, perform from step 4.

1.

Login to the server on which to perform the tasks. Perform operations after logging in with root (superuser).

2.

Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack (Agent Program and Manual)" for this version into the DVDROM
drive.

3.

Mount the DVD-ROM.

-

Example for Solaris

# mount -F hsfs -o ro /dev/dsk/c0t4d0s0 dvdromMountPoint

In command example, the device name of the DVD-ROM drive is mounted as /dev/dsk/c0t4d0s0. The device name of the
DVDROM drive may differ depending on the device.

-

Example for RHEL5/RHEL6/RHEL7 and SUSE Linux Enterprise Server 12

# mount -t iso9660 -r /dev/cdrom dvdromMountPoint

- 234 -

«
...
256
257
258
259
260
...
»

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands