manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 31

Server Type

Reference

Storage Management Server which also
serves as a Storage Server

Perform the steps of "

A.1 Backing Up Repository Data (for Windows)

", and

then perform the steps of "

A.3 Backing Up Management Information (for

Windows)

".

4.

If  AdvancedCopy  Manager  Copy  Control  Module  is  installed,  back  up  the  AdvancedCopy  Manager  Copy  Control  Module
operational environment of the previous version.

Refer to "

A.6 Backing Up Environment Setting Files

" for information on performing a backup.

2.1.2  Checking for Available Disk Space

Ensure that there is enough available disk space on the server where the upgrade is performed.
The required disk space for the upgrade is calculated as the "Required Disk Space for New version" minus the "Required Disk Space for
Previous Version".

Required Disk Space for New Version

The space required to install this version of the ETERNUS SF Manager.
Refer to "Operating Environment of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for this version for

information on the required disk space.

Required Disk Space for Previous Version

The space required to install the previous version of Express.
Refer to the 

ETERNUS SF Express User's Guide

 for the relevant previous version for information on the required disk space.

2.1.3  Uninstalling Incompatible Software

Check if any incompatible software for this version of the ETERNUS SF Manager is installed on the server where the upgrade is
performed. If incompatible software is found, refer to the relevant software manual and uninstall it before starting the upgrade.

 

 See

Refer  to  "Operating  Environment  of  ETERNUS  SF  Manager"  in  the 

ETERNUS  SF  Installation  and  Setup  Guide

  for  this  version  for

information on the incompatible software.

2.1.4  Estimating Database Size

A database is necessary for this version of Express.
The database size must be estimated before starting the upgrade.

 

 See

Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for this version

for details.

2.1.5  Preparing for Uninstallation

If AdvancedCopy Manager is installed, in order to start the upgrade, perform the DB unsetup before uninstalling the previous version.

 

 See

Refer to "

A.7 Unsetting Up Database

" for information on the DB unsetup procedure.

- 7 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands