5.1.5 Resuming Operation
When the tasks described above have been performed, the upgrade of the Storage Cruiser's manager is complete. Restart the Storage
Cruiser operation.
Point
When upgrading as well as changing the setting in SELinux to "enforcing" in the Linux environment, install the SELinux policy module
for snmptrapd and then restart the operation.
Refer to the following section in the chapter "Setup of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this
version for details.
-
"Setup of Storage Cruiser's Manager" > "SNMP Trap Setting" > "SNMP Trap Setting (for Linux)" > "Installation of SELinux Policy Module
for SNMP Trap Daemon"
Information
After upgrading to this version, when changing the SNMP communication protocol used for fault management from SNMPv1 to
SNMPv3, refer to "Changing SNMP Communication Protocol of Management Server" in the
ETERNUS SF Storage Cruiser Operation Guide
for this version and configure your operational environment.
5.2 Upgrading Storage Cruiser's Agent
The upgrade is performed as follows:
1.
Back up the Storage Cruiser's agent settings information.
-
For Windows
No.
Settings Information to Be Backed Up
File to Be Backed Up
1
SNMP Trap sending destination address
$OLD_TMP_DIR\Agent\var\sanm.ip
($OLD_TMP_DIR is "Work Directory" specified at the
previous Storage Cruiser's agent installation.)
2
Agent definition file
All files under $OLD_ENV_DIR\Agent\etc directory
($OLD_ENV_DIR is "Environment Directory" specified at the
previous Storage Cruiser's agent installation.)
3
User definition information
$OLD_INS_DIR\Agent\lib\defusr.dat
($OLD_INS_DIR is "Program Directory" specified at the
previous Storage Cruiser's agent installation.)
Note: If there is no file present, backup is not required.
-
For Solaris, Linux, or HP-UX
No.
Settings Information to Be Backed Up
File to Be Backed Up
1
SNMP Trap sending destination address
/var/opt/FJSVssage/sanm.ip
2
Agent definition file
All files under the /etc/opt/FJSVssage directory
3
User definition information
/opt/FJSVssage/lib/defusr.dat
Note: If there is no file present, backup is not required.
2.
Uninstall the previous version of the Storage Cruiser's agent.
Refer to the
ETERNUS SF Storage Cruiser Installation Guide
for the relevant previous version for information on uninstallation.
- 38 -
