See
Refer to "Operating Environment of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this version for
information on the incompatible software.
6.2.1.1.4 Estimating Database Size
A database is necessary for this version of Storage Cruiser.
The database size must be estimated before starting the upgrade.
See
Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this version
for details.
6.2.1.1.5 Tuning Kernel Parameters
Kernel parameter tuning must be performed in order to use this version of the Storage Cruiser's manager. Therefore, perform the
necessary kernel parameter tuning before starting the upgrade.
See
Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the ETERNUS SF Installation and Setup Guide for this version
for information on tuning.
6.2.1.1.6 Confirming Port Number for Communication Service
Therefore, ensure the new ports are available before starting the upgrade.
See
Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this version
for information on port numbers.
6.2.1.1.7 Preparing for Uninstallation
1.
Perform the DB unsetup.
Refer to "
A.8 Cancelling Repository Settings
" to unsetup the repository database of the previous version.
2.
When upgrading from Version 15.3 on the Linux environment, uninstall the FJSVswstt package (SNMP Trap daemon package).
Execute the following command to check whether the FJSVswstt package is installed.
# rpm -q FJSVswstt
If the FJSVswstt package information is displayed, execute the following command to uninstall the FJSVswstt package.
# rpm -e FJSVswstt
6.2.1.2 Performing Upgrade
Refer to "
- 59 -
