manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 205

OS Type

Directory

Red Hat Enterprise Linux 5 (for Intel64),
using the Symfoware linkage function

Red Hat Enterprise Linux 5 (for Intel64),
not using the Symfoware linkage function

dvdromMountPoint

/Agent_unix/AdvancedCopy_Manager/rhel5_x64

Red Hat Enterprise Linux 6 (for x86)
Red Hat Enterprise Linux 6 (for Intel64)

dvdromMountPoint

/Agent_unix/AdvancedCopy_Manager/rhel6_x86

5.

The installation information is displayed.

swsetup: Installer is preparing for installation...

+-----------------------------------------------------------+

|              ETERNUS SF AdvancedCopy Manager              |

|                           16.6                            |

|                  Copyright FUJITSU LIMITED 2013-2017      |

+-----------------------------------------------------------+

Welcome to Setup.

This program will install "AdvancedCopy Manager" on your system.

6.

A confirmation message is displayed before uninstalling the previous version. To uninstall the previous version and proceed with
the new installation, enter "y". To cancel the installation, enter "q". Press Enter.

An old version is installed in this system.

Do you want to upgrade? [y,q]:

7.

If "y" was entered for step 6, the upgrade continues.

If the upgrade completes successfully, the following message is displayed.

swsetup: AdvancedCopy Manager was installed successfully.

8.

Execute the following commands, and then eject the DVD-ROM.

# cd /

# umount dvdromMountPoint

 

 Point

If the upgrade was terminated abnormally, refer to "

11.2.5 In Case of Problem During Upgrade of AdvancedCopy Manager's Agent (for

Solaris, Linux)

" to recover the system to the normal state.

9.4.2.3  Tasks to Be Performed After Upgrade (Primary Node)

The tasks below need to be performed on the primary node.

1.

When the AdvancedCopy Manager's agent upgrade has been completed for the primary node, perform the following procedure:

If multiple Managed Server transactions exist, perform this procedure on each primary node for Managed Server transaction.

Edit the following environment setting files for Managed Server transaction on the shared disk for shared data:

-

<

Mount point of shared disk for shared data of Managed Server transaction

>/etc/opt/swstorage/clsetup.ini

-

<

Mount point of shared disk for shared data of Managed Server transaction

>/etc/opt/swstorage/swstg.ini

Change the version information within each file, as follows.

 

- 181 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands