1.
Stop the CCM Server transactions
Use the Failover Cluster Manager to stop the transactions to which the AdvancedCopy Manager CCM.
However, the shared disk for shared data of the AdvancedCopy Manager CCM must be online.
2.
Restore the operation environment of the previous version of the AdvancedCopy Manager Copy Control Module.
Note that if step a and step b have already been performed, perform from step c.
a.
Log on to the server using Administrator privileges.
b.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into
the DVD-ROM drive.
Refer to "DVD-ROM Contents" in the
ETERNUS SF Installation and Setup Guide
for this version for information on the DVD-
ROM structure and detailed contents.
c.
Implement restoration of the previous version.
Execute the following batch file. Execute the following batch file. For
backupDir
, specify the directory in which the backup
data is stored with an absolute path.
dvdromDrive:\Manager_windows\vuptools\esfccmpostinst_cluster.bat backupDir -primary
When the restore fails, after confirming the output error message and removing the cause of the failure, execute the batch
again.
Point
-
Spaces and the characters " | : * ? / . < > , % & ^ = ! ; ( ) are not supported for directory name.
-
The number of characters in a directory name must be up to 220.
d.
Eject the DVD-ROM.
9.6.2.5 Tasks to Be Performed After Upgrade (Secondary Node)
The tasks below need to be performed on the secondary node.
1.
Check that the CCM Server transactions are stopped.
If not stopped, use the Failover Cluster Manager to stop the transactions to which the AdvancedCopy Manager CCM belongs.
2.
Restore the operation environment of the previous version of the AdvancedCopy Manager Copy Control Module.
Note that if step a and step b have already been performed, perform from step c.
a.
Log on to the server using Administrator privileges.
b.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into
the DVD-ROM drive.
Refer to "DVD-ROM Contents" in the
ETERNUS SF Installation and Setup Guide
for this version for information on the DVD-
ROM structure and detailed contents.
c.
Implement restoration of the previous version.
Execute the following batch file. For
backupDir
, specify the directory in which the backup data is stored with an absolute
path.
dvdromDrive:\Manager_windows\vuptools\esfccmpostinst_cluster.bat backupDir -secondary
When the restore fails, after confirming the output error message and removing the cause of the failure, execute the batch
again.
Point
-
Spaces and the characters " | : * ? / . < > , % & ^ = ! ; ( ) are not supported for directory name.
-
The number of characters in a directory name must be up to 220.
- 192 -
