c.
Start the command prompt with "Run as administrator".
d.
Implement backup of the previous version.
Execute the following batch file. For
backupDir
, specify the directory in which to store the backup data with an absolute
path.
[When using the 32 bit version Agent]
dvdromDrive:\Agent_windows\AdvancedCopy_Manager\agent\windows_x86\esfacmapreinst.bat
backupDir
[When using the 64 bit version Agent]
dvdromDrive:\Agent_windows\AdvancedCopy_Manager\agent\windows_x64\esfacmapreinst.bat
backupDir
When the backup fails, after confirming the output error message and removing the cause of the failure, execute the batch
file again.
Point
-
The characters " | : * ? / . < > % & ^ ; ! are not supported for directory names.
-
If the directory name contains any spaces, they should be surrounded by double quote characters.
e.
Perform a backup of the following.
-
Windows System (primary node and secondary node)
-
Shared Disk for the Shared Data of the Managed Server transactions
f.
Eject the DVD-ROM.
9.3.2.2 Performing Upgrade (Primary Node)
Note that if step 1 and step 2 have already been performed, it is unnecessary to perform these again.
If multiple Managed Server transactions exist, use this procedure on each primary node for Managed Server transactions.
Note
Although the initial screen of the installer is displayed during these steps, this is not used in the Upgrade Installation. Be sure to click
Exit and end the screen.
1.
Log on to the server using Administrator privileges.
2.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Agent Program and Manual)" for this version into the
DVD-ROM drive.
Refer to "DVD-ROM Contents" in the
ETERNUS SF Installation and Setup Guide
for this version for information on the DVD-ROM
structure and detailed contents.
- 169 -
